YONG-FENG Hydraulic Industrial Hose Assembly Machines Cutting Cleaning Crimping Testing solutions by YONG-FENG


Product center

Adresse: Beicheng Subdistrict, Economic Development Zone, Weifang Shandong, China
Tel/Fax: +86-536-8300060
Mob/WSP: +86-13793601129
E-mail: inquiry@yong-feng.com
Site Web: www.yong-feng.com

Y-series Crimping Machines
your current location:Home >> Product center >> Y-series Crimping Machines

Y160 Crimping Machine


The crimp force of YONG-FENG Y160 hydraulic hose crimping machine is 2800KN, with a crimp range of 3~80mm and 14 sets of standard dies. YONG-FENG Y160 crimpers are widely used for crimping high-pressure fuel pipes, industrial hoses, water hoses, automobile air bags and wire ropes etc.

Max. inner diameter

Hoses with 2 braided wires: 3"

Hoses with 4 spiral wires: 2"

Hoses with 6 spiral wires: 2"


Crimp head materialFORGE STEEL
Crimp range3-80mm
Hose size2", 6SP
Passing diameter160mm
Opening diameter160mm
System pressure31.5Mpa
Crimp force2800kN
Standard voltageCustomized
Standard dies14 sets
L x W x H730*1000*1620mm

Specification of dies

High pressure dies:

Crimp range15-25mm18-28mm20-30mm23-33mm26-36mm29-39mm37-47mm46-56mm51-61mm63-73mm

Low pressure dies:

Crimp range6-16mm8-18mm10-20mm12-22mm


The oil cylinder cover, oil tank and piston rod are made of 40 chromium, with a surface hardness of HRC26-30 and an operation layer hardness of HRC59-63. The hardened layer is 2mm thick. The 40 chromium is high pressure resistant and tear resistant with great impact absorbing and carrying capacity. Therefore, the oil tank and piston rod are more durable.


The oil pump is immersed in hydraulic oil inside the oil tank for cooling and silence. The oil pump is driven using an electric motor and the hydraulic oil is pumped out, pushing the plunger in the oil tank. As a result, the die set compresses in a radial direction and crimps the hose connector. When the compression amount reaches the predetermined value, the compression will automatically stop. Then the magnetic reversing valve switches the direction and the plunger moves backwards. As a result, the die set expands and the hose crimping process is finished.

For QUOTATION: inquiry@yong-feng.com

2017 YONG-FENG Hydraulic Industrial Hose Assembly Machines Cutting Cleaning Crimping Testing solutions by YONG-FENG 鲁ICP备16049522号